NewClean nanometerizes the waterproof molecules and processes them with micromolecular technology to form a deep cleaning layer.

Most other brands are chemical solvents, which only form a waterproof film on the surface after volatilization. The effect is not long and it is easy to fall off.

The water-absorbable surface forms a nano-protective layer that blocks liquid contamination, and also makes the surface less likely to be dirty. It has a cleaning effect while making it easier to be washed. The effect and duration of the nano-protective layer is determined by the stress endurance of the item. General cleaning with a washing machine can last about 15 times, retaining 100% of its water-repellent, anti odour, anti-microbial, UV protection and other functions. It can last between 3 to 6 months in accordance to general family use. During this period, all functions are effective.

*Nano-protective layer's duration may vary depending on material

NewClean can be applied to a wide range of materials, such as fabric clothing, rayon, nylon, canvas, suede, wood, cement and other hydrophilic surfaces. If NewClean can be absorbed or applied evenly, it will be effective.

Wool is naturally resistant to water, high wool content fabrics are very difficult to absorb water. Maintain a distance of 20cm or more when spraying. Test a small corner before spraying.Test with a small corner and spray only 10%-30% of the usual amount, spray on unnoticeable area such as the back of clothing or sleeves.Spray on the sleeves (spray once), observe closely:
First, determine whether the fabric absorbs NewClean. If the surface does not absorb NewClean, wait 10-15 minutes for NewClean to be absorbed. If NewClean is still on the surface, gently apply pressure and push NewClean into the fabric. Observe if there is any white residue after drying. Wool has high water resistant which affects the absorption of NewClean. Be sure to test and ensure there are no white residue before continuing. Spray a larger area till it is slightly damp (lightly spray). Either hang or place on a surface to allow natural drying.

NOTE: If white residue is observed after test spraying. Do not be alarmed as the spray area is not large and it can be wiped clean with your hands. This is due to a reaction between the wool's lanolin and NewClean.

New clothes can be sprayed after washing and dried. For easier washing and to reduce odour, spray till moist and wait for it to dry. Spray again after drying for better water resistance.

Spray roughly around 30% the usual amount and allows the surface to absorb NewClean. Allow 15 minutes drying time. Spray again until the surface is moist.

When clothes are stained, slightly pull on the clothes and flick away dirt. Due to NewClean's protective properties, dirt can be flicked away.

If clothing comes in contact with tomato sauce or similar sticky consistency. Rinse with clean water to remove the contaminant.

When clothing that are protected with NewClean comes across dirt or grime, the most effective way is to rinse with clean water

Cloth sofa is a good object to be used with NewClean but what about sofas that has been sat for several years? What should I do?

Please clean and then spray on the sofa or carpet. It will be easily absorbed; the spray amount should be about 120% of the usual spray amount. Spray until moist and it will be protected after drying. After spraying, drying with a hair dryer is also recommended.

After using, it will not absorb water easily.

In the manufacturing process, most wooden furniture are painted or waxed. NewClean is not suitable to be used on surfaces of these paint and waxes, the protection provided is very limited in this case. If there is no paint or wax protection on the surface of the wooden furniture and you would wish to use NewClean to protect it. Clean the surface with an alcohol based wet tissue and allow it to dry.

NewClean forms a protective layer which is safe for families and the environment. If paint or wax is present, the absorption will be greatly reduced and the effects will not be satisfactory. The main function of NewClean is its water repellency, anti-odour, and antibacterial abilities.

Due to the pores on the surface, marble tops are very difficult to clean. If traces of dirt are left, the texture and appearance of the marble will be damaged. Before using NewClean, wash the surface with a detergent and wait for it to dry. Due to the limited water absorption of the marble top, spray one layer of NewClean and wipe it with a damp kitchen towel to cover the surface evenly. Finally spray another layer lightly, drying with a hair dryer is not suitable for this kind of surface. The protective layer will be formed after drying.

If soy sauce spills onto the marble top, it should be blotted dry with a kitchen towel and washed with clear water and be allowed to dry. If viscous oil adheres to the surface, do not scrape or wipe it. Rinse with clean water, it will activate the protective layer of NewClean and removes the dirt and oil.

When used on bathroom tiles or wooden floor/wood cabinets, it can form a nano-protective layer to block water vapor, and effectively isolate water vapor to reduce the chance of water droplets adhesion resulting in moisture and mold.

It effectively inhibits the breeding of Aspergillus niger, Chaetomium globosum, Myrothecium verrucosa, Penicillium citrinum, Aspergillus clavatus, Trichoderma harzianum, etc.

Usage steps:

• Please remove the mold and dirt on the surface first, and then rinse with water or wipe with a wet cloth.
• After it's fully dried, spray evenly at a distance of about 15-20 cm from the target and completely coat the target.
• After it's completely dried, an effective protective layer will be formed on the surface, which can fully prevent the growth of mold.

NewClean uses a special protective nano layer to protect the surface the intended object and prevents water absorption. Without a moist surface, the growth of bacteria is greatly reduced.

Don't worry, the white spots are caused by excessive aggregation of waterproof polymer after NewClean is sprayed too densely. Please pat the surface and wipe with wet paper towel or cloth with alcohol.

It is recommended to be used with a clean sponge.

The steps are as follows:

• Clean the fabric to be sprayed on.
• Spray NewClean on a clean sponge to make it absorbed with NewClean and become a non-absorbent sponge.
• Flatten the fabric and spray NewClean on it until the surface is wet. Wipe with the above sponge evenly and air dry the fabric.
• Since each waterproof fabric absorbs waterproof polymer in different degrees, if the outcome does not look good, you can repeat step 3. For example, on the shoulder part where waterproof effect is more likely to fail, it is recommended to wipe and apply evenly 2 to 3 times to enhance the waterproof effect.
• The process is completed after the fabric is dried.

No, the water molecule of the NewClean is 1 / 500th the size of the diameter of the hair, and it will not change the feel of any fabric.

NewClean is safe, eco-friendly, does not leave harmful substances, and has passed SGS skin irritation certification. Therefore, it can be sprayed on the outside of the mask for double protection.

Most of the waterproof sprays on the market are high-pressure spray cans. It is not recommended to carry or check them on the aircraft. By contrast, NewClean container does not contain compressed gas. It is absolutely safe.